Description：
This item is based on the DSP-controlled three-phase stepper motor driver. It is combined with advanced DSP control chip and three-phase inverter drive module together constitute the new generation of digital stepping motor driver. Drive voltage is AC110V-220V, Adapter current below 5.8A (7.0A), OD 57-130mm various types of three-phase hybrid stepper motor. This circuit allows the motor running smooth, almost no vibration and noise at high speed, the motor torque is much higher than the two-phase and five-phase hybrid stepping motor. Positioning accuracy is up to 60,000 steps / rev. The products are widely used in the engraving machine, medium-sized CNC machine tools, computer embroidery machine, packaging machinery and other high-resolution large and medium-sized CNC equipment.
Feature
* High performance, low price
* 16 channels angle constant torque subdivision, a maximum resolution of 60,000 steps / rev
* Maximum response frequency is up to 200Kpps
* The pulse stops over 1.5s, the coil current is automatically reduced to half of the set current
* Opto isolated input / output
* Drive current from 1.2A / to phase 5.8A / phase (1.3A / phase to 7.0A / phase) sub-16 adjustable
* Single power input, voltage range: AC110V-220V
* Phase memory function (Note: the input is stopped for more than 3 seconds, the automatic memory of the drive when the motor phase, re-power or MF signal from low to high, the drive motor automatic recovery phase).
Alternative product item: DVS DV3522(DV3722) YAKO YKC3722MA
Current setting
The drive current is set by the D1-D4 terminal, The running current work properly output current setting switch (see table below)
沪公网安备31010402001403号
