| Certificates/Standards: | N; |
| Monthly Output: | Not provided |
| Regional: | Shantou |
| Packaging Information: | Not provided |
| Mode Of Payment: | Not provided |
| Delivery Lead Time: | Not provided |
| Main Sales Markets: | North America,Central/South America,Western Europe,Eastern Europe,Australasia,Asia,Middle East,Africa |
| Sample Provided: | No |
| Sample Policy: | Not provided |
| Minimum Quantity: | Not provided |
Description:
The product is based on the DSP-controlled two-phase stepper motor driver, the new generation of digital stepping motor driver. Drive voltage is DC24V-80V adapter current below 6.2A, outside diameter 57-86mm various types of three-phase hybrid stepper motor. The internal drive uses a similar principle of servo control circuit, which can make the smooth operation of the motor, the motor at high speed, torque higher than the two-phase hybrid stepping motor. Positioning accuracy of up to 60,000 steps / rev.
* High performance, low price
* 16 channels angle constant torque subdivision, a maximum resolution of 60,000 steps / rev
* Maximum response frequency of up to 200Kpps
* The pulse stops 1.5s, the coil current is automatically reduced to half of the set current
* Opto isolated input / output
* Drive current 2.5A / phase to 6.2A / phase 8 adjustable
* Single power input, voltage range: DC 24V-80V
* Phase memory function
(Note: the input is stopped for more than 3 seconds, the automatic memory of the drive when the motor phase, re-power or MF signal from low to high, the drive motor automatic recovery phase).
Current setting
The drive current is set by the D1-D4 terminal, The running current work properly output current setting switch (see table below)