Vacuum lifter/Coil lifter/Vacuum lift
Detailed Product Description
1. the Vacuum lifter device up to 1000kg.
2. for Aluminum Coil Prodution, Copper Coil handing, Paper Coil handling, Steel Coil handling. Carbon Coil handling
To make the following technical specifications by Shanghai Herolift Automation Corporation , According to your company inquiry.
1, Plate parameters provide for vacuum lifter lifting:
(1) Material : The reels of coil Aluminum strip, Maximum weight 300kg
(2) Dimensions of it is :
Inner diameter :300mm
Outer diameter :1200mm
Width of a strip :300mm
Thickness of reels of coil Aluminum strip :0.1mm
Weight of reels of strip : from 180 to 300 kg
(3) Handling way: Horizontal and vertical handling.
Lifting of Coil from Flat (Pallet) surface and Tilting by 90 degree and Loading on the machine.
(4) The surface of sheet, even, smooth, densification.
(5) Other special requirements: None.
2,Existing crane mechanical and electrical configuration:
(1) Power supply: 380VAC±15%, Frequency: 50Hz ±1Hz, Three wire three-phase system
(2)Operation manner: Manual hand slide valve for vacuum start and stop operation of production area
(3)Lifting equipment: Driving/cantilever crane , The whole machine adopts the integrated design, vacuum lifter machine is hanging on the crane. (should be provided by the client)
3,Vacuum lifter specification description:
3.1 Equipment specification selection
To choose model CLS300-2-T, Vacuum lifter is design by Shanghai Herolift Corporation.
| Load(kg) |
Type |
diam.of suction plate(mm) |
Suction force(kg) |
Vacuum pump |
Power
V / HZ / PH
|
Control mode |
Dead load(kg) |
Overall of machine(mm) |
| 200 |
CLA200-3-T |
500 |
400 |
VT4.8 |
220/380 50/60 1/3 |
manual valve |
280 |
500*500*600 |
| 400 |
CLA400-3-T |
600 |
800 |
VT4.8 |
220/380 50/60 1/3 |
manual valve |
280 |
600*600*600 |
| 600 |
CLA600-4-T |
700 |
1200 |
VT4.16 |
220/380 50/60 1/3 |
manual valve |
280 |
700*700*600 |
| 1000 |
CLA1000-5-T |
900 |
2000 |
VT4,25 |
220/380 50/60 1/3 |
manual valve |
280 |
1000*100*600 |
The device includes the following main components:
Vacuum pump:
Oil free air cooling type rotary vane vacuum pump, connected to 380V, Three-phase power supply can produce vacuum, Three-phase power can produce vacuum, As a core part of vacuum system, The highest vacuum degree 85%;
Vacuum pad:
To suction the coil surface, Rubber sealing ring in contact with the AL COIL, ensure that won't cause damage to the COIL surface.
Vacuum filter:
To eliminate the dust and particles in the air flow, ensure the lifetime of the vacuum pump;
Vacuum gauge:
To show the vacuum level to the operator, Provide security;
Vacuum pressure switch:
Pump-film type,When insufficient vacuum pressure, To give electrical signal to alarm system.
Manual slide valve:
To switch off the access of vacuum pump and suction pads between the air flow, Safety locks ,prevent accidental operation.
Vacuum non-return valve:
When the system power failure occurs, automatically shut off the vacuum pump and air channel, Lock the vacuum energy of vacuum tank. Provide enough pressure holding time, ensure the workpiece will not falling in suddenly.
Manual Ball Valve:
To manually open or close vacuum pump and suction pads pathway, convenient maintenance.
Alarm indicator lamp:
When the suction force of a single set of suction pads is insufficient, The corresponding indicator light alarm.
沪公网安备31010402001403号
