T series spiral bevel gear steering box

                                   
Product Description：

T series spiral bevel gear steering box

Widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other mechanical equipment, assembly line and other industries.

Technical Characteristics：

Housing: High-rigidity FC-25 cast iron casting;

Gear: The gear is made of high-quality and high-purity alloy steel 20CrMnTi carburized and quenched, and ground;

Spindle: alloy steel quenched and tempered shafts, high hanging load capacity;

Bearings: equipped with heavy-duty roller bearings;

Oil seal: the oil seal of double seal lip has both dustproof and anti-leakage capabilities

Technical Parameters：

 


	

		

			
Performance Characteristics：
			

			
◆ T series spiral bevel gear steering box, standardized, multiple varieties, all the speed ratios are actual transmission ratios. The average efficiency is 98%.

			
◆ Single axis, double horizontal axis, single longitudinal axis, and double longitudinal axis are available.

			
◆ The spiral bevel gear can run in both forward and reverse directions, and the low-speed or high-speed transmission is stable, and the noise is low, the vibration is small, and the bearing capacity is large.

			
◆ When the speed ratio is not 1:1, the horizontal axis input and vertical axis output are deceleration, and the vertical axis input and horizontal axis output are increasing speed.
			
		
		

			
Technical Parameters：
			

			
Speed ratio range: 1/1 1.5/1 2/1 2.5/1 3/1 4/1 5/1

			
Torque range: 11.2-5713 Nm

			
Power range: 0.014-335 kW
			
		
		

			
Model Mark：
			

		
		

			
Type：
			
T2 T4 T6 T7 T8 T10 T12 T16 T20 T25