Label dispenser LA7000

                                   
Label dispenser - reliable labeling

LA7000 - reliably apply pre-printed labels

The LA7000 is a label dispenser that reliably applies pre-printed labels to your product. A wide range of different applicators makes it possible to apply labels on one side, on two sides or even across corners. Driving the applicators with servo motors enables reliable and repeatable labeling, with all settings made via the integrated touch control panel.

The right dispensing arm for every application

Linear dispensing stamp - TAMP

The TAMP is the standard dispensing arm and is used very frequently. It can be used to apply labels to one side of a product. This can be the top, bottom or a side surface. The label is applied by a linear movement. To suit your application, we offer the TAMP with different maximum strokes between 125mm and 750mm. With the help of the integrated sensors, the TAMP can detect the product surface and automatically react to products of different sizes. This increases flexibility and reliability and reduces complexity. The dispensing arm is driven by a servo motor. This allows large dispensing speeds, precise and repeatable positioning, and easy adjustment via the integrated touch control panel.

On two sides - FASA

This dispensing arm, which applies labels by a pivoting motion, can apply a label to any side of a product. In addition, two labels can be dispensed on two different sides of a product. This can be done, for example, on the front and top, but other combinations are also possible. This module is also ideally suited for dispensing longer labels across corners. The FASA applicator is available with different arm lengths, thus achieving different ranges and cycle rates. Drive via servo motors enables high dispensing speeds and precise positioning.

On uneven objects - HST

The movable HST pad allows labels to be applied to uneven surfaces. The labels are pressed on with one side of the pad by a roller and applied to the passing product. Here, only the roller is in contact with the product, the inclination of the pad allows to compensate for unevenness. The HAST applicator is based on the TAMP dispensing arm. Also it donates the labels through a linear movement.

Simply strip - WIPE

With WIPE, labels are simply applied to the product on the fly. This can be done on the top, bottom or side surface. The labels are positioned on the product via a dispensing edge and pressed on with the aid of a brush. The WIPE version is only available with the LA7000 label dispensing system.

Non-contact - BLOW

For particularly pressure-sensitive items, the BLOW dispensing system is recommended. This is a TAMP system with the special feature that the labels are not pressed on, but are blown onto the product from a short distance with a blast of air.

Around the corner - WASA

If a label is to be applied across a corner, the WASA applicator is the solution. The label is applied by a purely mechanical applicator. The WASA arm is positioned on the conveyor so that passing products are driven against it. An adjustable pressure force applies the label to the product across the corner.