Air power Vacuum lifter for stone/marble
To make the following technical specifications by Shanghai Herolift Automation Corporation , According to your company inquiry.
1, Plate parameters provide for vacuum lifter lifting:
(1) Material : Stone, Maximum weight 600kg
(2) (2950)L mm X(1950)W mm X(40)Tmm Max.weight:400kg.
(3) Handling way: Horizontal handling, and can tilting 90 degree by electrical motor.
(4) The surface of marble slab, smooth surface.
(5) Other special requirements: None.
2,Existing crane mechanical and electrical configuration:
(1) Power supply: 380VAC±15%, Frequency: 50Hz ±1Hz, Three-phase system
(2)Operation manner: Manual operation of production area for suction and release.
(3)Lifting equipment: Driving/cantilever crane (should be provided by the client)
3,Main performance indicators
|
Model No.
|
BLS600-6-T
|
Maximum load
|
Horizontal handling 500kg
|
|
Overall dimensions
|
2000mmx800mmx1220mm(Approx);
|
Power input
|
380V,50HZ, 3 Phase ( depend on your local voltage)
|
|
Model of Control
|
Suction and release control by manual push-pull valve
|
Suction and release time
|
Less than 2s, (Only first suction time slightly longer, about 10~15s)
|
|
Maximum pressure
|
85% Vacuum degree(Approx: 0.85Kgf)
|
Warning pressure
|
60% vacuum degree(Approx 0.6Kgf)
|
|
Security coefficient
|
S>4.0,(Vertical lifting)
|
Net weight
|
130kg(Approx);
|
|
Pressure maintaining (when power failure)
|
After Power Failure, the holding time when suction plate by vacuum system >30min.;
|
|
Safety alarm
|
When the pressure is lower than the set alarm pressure(60%), Sound and light alarm automatic alarm.
|
4, Operational control instructions of suction pad.
4.1 With board joint:
Control of the driving crane, Make the vacuum lifter move to above of the Granite slabs, make the vacuum lifter move to the upper of the sheet material.
4.2 Board suction:
Push forward the push-pull valve, Suction pad began to automatic suction plate. when the vacuum degree reaches requirements, meet the suction conditions, the green light is lit up, meanwhile, outputs a signal to the driving crane, driving can prompt and run on horizontal.
4.3 Board tilting
Operate the control handle. Press the forward and reverse button on the control handle.
4.4 Board movement:
Control the driving crane movement to the designated position.
4.5 Board Tilting:
Horizontal handling, Tilting 90 degrees by wire remote control
4.6 Plate release:
To press the safety pin on the push-pull valve, pull back the push-pull valve,plate was released.
4.7 Suction pad control respectively:
When the plate length less than the outermost pad distance of two groups, through shut down the manual ball valve on each suction cups. separation from air flow of vacuum system, To prevent the vacuum leak.
Function
Max. load 600Kg
Need compressed Air power supply
From Horizontal to vertical by air cylinder,
without damages
one operator
Acoustic Warning
Intergrated safety tank
Imported Pump&Valve
Efficient,safe,quick,easy
Safety Tank&pressure switch waring
Adjustable suction cups, can be turned off individually
CE passed
Applications
steel boards
Aluminium Boards
Plastic Boards
Glass and windows industry
Stone Slabs
Laminated chipboard
沪公网安备31010402001403号
